News

  • 0
  • 0

TR30 CLC Foaming Machine Concrete Foam Generator

European Commission President Ursula von der Leyen recently called on India and other countries to support sanctions against Russia over the Ukraine incident. At The Raisina Dialogue forum, von der Leyen said, "We earnestly appeal to all members of the international community to support our efforts to achieve lasting peace."  

Von der Leyen says countries around the world that have been suffering from the virus for two years must now deal with higher food, energy, and fertilizer prices. What is happening in Ukraine will not only determine the future of Europe, but also have profound implications for the rest of the world.

Because of the Russia-Ukraine conflict, the prices of many other commodities like the Concrete Foaming Generator are expected to continue to rise in the future.

Description of TR30 foam generator

Foam Concrete Machine is the core equipment of foam concrete production, which has a significant impact on the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output but more importantly, the quality of the foam produced is outstanding. TR30 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR30 foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.


Parameters of TR30 foam generator

Model

TR30

Maximum foam outputm3/h)

8

Motor voltage(V)

220

Work rate(W)

1500

Pump suction(m)

1-3

Dimensions(cm)

120*50*90

Weight(kg)

120


Usually need to be disassembled:

1. After working for a long time, it is found that the foam shape is not good, usually more than three months.

2. Pipe blockage: Some foaming agent remaining in the bubble tube will form a solid residue. In this case, the foam cannot be produced normally, or the pipeline pressure increases sharply. At this time, all the old steel balls need to be taken out, and then replaced with a new one The ball is fine. Steel wire ball specification requirements: each blowing tube needs to be filled with about 12-15 steel wire balls. Too much or too little will affect or even destroy the foam performance. 


Precautions:

1. Remember to use electricity safely. If water or foam touches the circuit, you must immediately cut off the power at the remote end to ensure safe production.

2. There will be air in the pipeline when it is used for the first time. The foaming liquid has not been pumped into the equipment in a short time. You can wait for tens of seconds until the liquid is filled with the entire suction tube and the foaming operation can be performed normally.

3. Do not start the equipment when the pipeline is blocked to prevent damage to the components due to overpressure in the pipeline.


If you are looking for foam generator please feel free to contact us and send an inquiry, email address: sales@cabr-concrete.com


Model: TR30
Maximum foam output(m3/h): 7.5
Motor voltage(V) : 220
Work rate(KW): 3
Foaming speed(L/m): 120
Bubble bleeding(kg/m3): 46
Dimensions(cm): 120*50*90
Weight(kg): 120

The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and Concrete Foaming Generator. If you need to know more anode materials and Concrete Foaming Generator, please feel free to contact us.

Inquiry us

Our Latest News

What is Tin disulfide

What is Tin disulfide? Tin disulfide, an inorganic compound with chemical formula SnS2. It is an yellow hexagonal flake that has an CdI2 crystal structure. It is not soluble in water, but it's water-soluble in aqua regia. It is also soluble in hot a…

316 stainless steel and its application

316 stainless steel and its application 316 stainless steel can be utilized for a range of uses. It is renowned in its chemical formula, and its mechanical and magnetic properties. It is also used for welding, and similar processes. Because of these…

Tungsten disulfide nanoparticles and coatings

Tungsten disulfide Nanoparticles and coatings If you're a professional, an amateur, or just looking for an affordable way to keep your machine working smoothly, you'll find numerous options for greases and paints. There are many choices for paints.…